Saturday, May 21, 2016

Why Western Electric cable is so good?

Why Western Electric cable is so good? 

Why Western Electric cable is so good? Because it has a very distinctive features, it is a relatively high frequency soft, delicate but not very bright, transparent midrange, thick but not fat, but also low frequency is more flexible but not a hard, and it is widely used to make HIFI speaker interconnection cable and power cord for tube amplifier, that make the amplifier have pretty good performance, such as high-frequency glitches was silky smooth, overall feeling is very soft.

Those cables that consistent used in sea, military, communication were made of pure copper wire, cotton knit, soft packed which lead to good insulation, so it can play a very good waterproof, fireproof effect. And also, this makes the cable be super soft, you may redeem at any angle, fairly broad applicability.

There are main features for the cable

  1. The cable has a special physical structure, internal copper core soft, silver-plated copper core out of white metal, then a gray insulating layer to twine wrapped, pure tone and warm, thick, and is a good choice to produce HIFI speaker cable, power cord.
  2. WE gray spots cable, the first outer is layer of cotton, a second layer is plastic, the third layer is 250 pcs 0.25mm outside diameter copper core with coated silver metal.
  3. With transistor amplifier, it also has a very good performance, its sound performance is clear, calm, rounded lines, grainy lines outstanding performance, wide sound field depth, and the sound quality is concerned.




Now audiophiles use it to make HIFI power cord or interconnection speaker cables.

There is a HIFI power cord that is made of Western Electric cable and Oyaide 6N OFC gold-plated power plug & socket , it is good choiec for your tube anplifier.









Monday, May 16, 2016

High Power 2 x 50W Tube Amplifier with Antique FU13 (813) Tubes

High Power 2 x 50W Tube Amplifier with Antique FU13 (813) Tubes


Tube FU13 (Shuguang 813) belong to antique one, which is a direct thermal beam shot tetrode with thorium tungsten cathode, graphite anode. In the radio equipment, it can be used for the oscillator power amplifier tubes, and its using frequencies are up to 30MC. When it is used as a power amplifier (such as Class AB), its output power is up to 300W or above, it is high reliable, excellent linearity, and not only does it perform tigers’ roaring and thunder exhaustive, but also can perform thin piano voice with detailed and delicate, it is the master of tube amplifier.

FU13 sound is very good, power and life are outstanding, air sense and sound field is far better than with that cannot be compared, you may not want to listen to small power output tube after listeningFU13.It is the first choice to drive low-sensitivity, high-power and high-end speaker.

There is the tube amplifier with tubes FU13.It is a mono-block integrated tube amplifier with 2 x 50W high output power, which is made of pure tubes, adopt 2pcs 12AT7 plus  2pcs 6N8P to drive 2pcs FU13, and its recrifier adopt tube 5Z4P.


 2 x 50W Tube Amplifier with Antique FU13 (813) Tubes

 2 x 50W Tube Amplifier with Antique FU13 (813) Tubes



Details 
















Lighting




Features

1. Adopt 2pcs 12AT7 + 2pcs 6N8P as driving amplifier;
2. Adopt 2pcs FU13 as power amplifier;
3. Adopt 1pc 5Z4P as rectifier;
4. RCA signal terminal as high-grade gold-plated, thick gold-plated for 4 ohms / 8 ohms output terminal;
5. Power transformer and output transformer using imported high-sic sheet, high-purity oxygen-free copper wire layer and section production;
6. Volume knob using Japan ALPS type 27 of blue shell;
7. Coupling capacity using MIT of USA.


Product Specifications

1. Rated output power: 50W + 50 W
2. Frequency response: 20Hz – 20kHz
3. S/N ratio: ≥90dB
4. Impedance: 4Ω / 8Ω
5. THD: ≤1% (@1K Hz)
6. Power voltage: 110v or 220v
7. Net wet: 26kg
8. Dimension(L * D * H):455mm * 290mm * 230mm
9. Tubes:
   12AT7 x 2, 6N8P x 2, FU13 x 2, 5Z4P x 1.
10. Accessories:
   Power Cord x 1